Siemens Micromaster 440 6SE6440-2UD24-0BA1 repair
We repair the Siemens Micromaster 440 6SE6440-2UD24-0BA1 at component level in our workshop in Mouscron, Belgium. The unit is functionally tested before it ships back, with a case reference, a full repair report and a 1-year warranty.
Send us the unit with the fault code shown on the display. If it’s dead with no display, say so in your repair request.
- Quote
- Within 5 working days, or 2 with expedite
- Warranty
- 1 year on every repair
- Return shipping
- Included for Belgium and northern France
About this unit
| Detail | Value |
|---|---|
| Order number | 6SE6440-2UD24-0BA1 |
| Also written as | 6SE64402UD240BA16SE6440 2UD24-0BA1 |
| Series | Siemens Micromaster 440 |
| Rating | 4 kW, 380–480 V three-phase |
Typical faults on this model
- Failed internal power supply: dark display, no response on the operator panel.
- Shorted IGBTs after a motor or cable fault, usually with F0001 before the unit stopped.
- Worn DC link capacitors on units that have run for many years.
Fault codes on this model
| Code | Meaning | Start a request |
|---|---|---|
| F0001 | Overcurrent | Overcurrent trips |
| F0002 | Overvoltage | Voltage trips |
| F0003 | Undervoltage | Voltage trips |
| F0004 | Inverter overtemperature | Overheating |
A fault code shows where the drive tripped, not always what failed. If the same code keeps coming back after a reset, the cause can be the motor or the cabling. We check for that and note it in the repair report.
Repair terms for this unit
You get a fixed-price quote within 5 working days, or within 2 with expedite (optional supplement, shown in the repair request form). Diagnosis is included when you accept the quote. If you decline it, or the unit can’t be repaired, a fixed diagnosis fee for this type of unit applies; you see it in the repair request form before you send the unit.
The quote is a fixed price for the unit, parts included, with no VAT added (small business VAT exemption). Nothing is repaired without your approval. Return shipping is included for Belgium and northern France. Read the full repair conditions.
Need a unit today?
If your line can’t wait for a repair, we can source a new, refurbished or exchange 6SE6440-2UD24-0BA1 and confirm availability, condition and price, usually within one business day.
Ready to send your 6SE6440-2UD24-0BA1?
Start a repair request to get your case reference. See also all Siemens repairs and frequency converter repair.
Xania Electronics, Rue du Général Fleury 29, 7700 Mouscron, BelgiumMobile +32 470 61 37 94 · Landline +32 56 55 46 02
Xania Electronics is an independent repair service and is not affiliated with Siemens AG. Siemens and MICROMASTER are trademarks of Siemens AG, used here only to identify the equipment we repair.